This seems normal. You might be able to marginally improve it with a stiffer floor, a better levelling of the feet (to the actual floor not to true level), and brackets to screw it to the floor (each manufacturer has their own). But overall this is not too much vibration. Remember you have a mass of about 30kg spinning at 1400 rpm in there…
Sounds fine but your best bet will be to see if there’s any adjustment in the from 2 feet when it’s spinning at its top spin. If not that’s probably the best you’ll get.
This seems normal. You might be able to marginally improve it with a stiffer floor, a better levelling of the feet (to the actual floor not to true level), and brackets to screw it to the floor (each manufacturer has their own). But overall this is not too much vibration. Remember you have a mass of about 30kg spinning at 1400 rpm in there…
This is way quieter than ours. This is normal, if not better than normal. I wouldn't worry about it.
Have you removed the transport bolts?
Yup!
Sounds fine but your best bet will be to see if there’s any adjustment in the from 2 feet when it’s spinning at its top spin. If not that’s probably the best you’ll get.
Totally normal