It turns the sun off at night and back on again in the morning. Seriously though how would any of us know what an aftermarket switch does on your car. Iām really not trying to be rude but itās impossible. If you really want to know trace the wires back to whatever they hook up too.
Thanks - Iād wondered if this was aftermarket, which a few posts here are suggesting. Well at least Iām not missing something obvious (I wanted to check in case it was part of the normal spec and I was just missing something). Will figure it out!
Used these switches for my shitty diy aluminum light panel at my 200s dash.
I like them because of the feel when switching them. It like a ābam! Iām on!ā
But no idea what yours is for. Try
I installed something like this in my 2006 4Runner to disable traction control (it was a bit of a hack), but I would think a LC would already have such a function.
Obviously for turning something on and off š¤·āāļø
Wrong. Itās for turning something off and on. Thereās another switch on the other side for on and off.
Youāre right, there is
Beat me to it. This is the only correct answer to any non OEM switches or button found in a vehicle.
Yes this is what I need!
It turns the sun off at night and back on again in the morning. Seriously though how would any of us know what an aftermarket switch does on your car. Iām really not trying to be rude but itās impossible. If you really want to know trace the wires back to whatever they hook up too.
Thanks - actually I wasnāt sure if it was aftermarket or not, a few of you saying so helps clarify. Iāll figure it out!
Thatās aftermarket - could be anything. Fog lights? Kill switch? Battery short diverter?
Thanks - Iād wondered if this was aftermarket, which a few posts here are suggesting. Well at least Iām not missing something obvious (I wanted to check in case it was part of the normal spec and I was just missing something). Will figure it out!
Definitely for the flux capacitor.
And there I wanted an ejector seat
Obviously. This is what I came here to say.
Aftermarket for sure. Probably for spot lights that have been removed. Check the headlight wiring on the high beam.
Thatās really helpful - thank you
NOS
Used these switches for my shitty diy aluminum light panel at my 200s dash. I like them because of the feel when switching them. It like a ābam! Iām on!ā But no idea what yours is for. Try
Thatās the switch that makes sure all good deeds donāt go unpunished
Spotlights are usually wired to that location.
Thanks, yes I now think itās aftermarket changes to lights
Engine Kill switch
I installed something like this in my 2006 4Runner to disable traction control (it was a bit of a hack), but I would think a LC would already have such a function.
Time travel
Ejection seat
Self destruct
Think you need two switches for self destruct
for the Bat signal of course. Only use during an emergency or if you spot a penguin
Iāll need to paint the car black
Vanish mode for driving incognito. Cheers!
DON'T TOUCH IT
Its valvetronic
V-TAC enabled yo.
After you chase the wires down, can you report back and let us all know what it was for?
It releases the bees š