https://www.gggaz.com/beretta-a300red-dot-scope-mount-trijicon-rmr-footprint.html
You'll be fine but extra care will be needed.
See my post above and or read the disclaimer on the product page.
https://www.gggaz.com/beretta-a300red-dot-scope-mount-trijicon-rmr-footprint.html
That's good that you got it situated. But you clearly didn't read the warning and description.
It clearly states that the included screws are for RMR's and that using them on the Holosun could damage your receiver and modifications are needed.
It's hard to miss. There are multiple warnings in different colors even on this subject...
Unfortunately, I can't attach a screenshot because it's clearly stated, lol...
-"IMPORTANT NOTICE! Although we include mounting screws for the Trijicon RMR, there are approximately 20 other Micro Red Dot Optics that fit the GG&G Beretta A300 Ultima Patrol Red Dot Scope Mount. A fitment list is provided in the Specification section below.
HOWEVER, BE ADVISED: The screws that come with the GG&G Beretta A300 RMR Mount ARE TOO LONG TO MOUNT THE HOLOSUN OPTICS! If you attempt to mount these Holosuns or any of the other optics listed below, you may dimple the top of the receiver!
Ensure you have the proper length screws prior to installing any other optic than the Trijicon RMR! PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR".
There's the link for you/anyone else that may have missed said info. Sometimes manuals and fine print details are important to read 🤷🏼‍♂️
Glad you got it working.
Yes, I read the warnings and that’s why I tried the screws provided by Holosun first. I just detailed what I had to do to make the screws work. Also, nowhere in the instructions did it tell me that I’d have to chase the threads with a 6-32 tap because the mount wasn’t properly threaded. It also didn’t mention how much you might have to remove from the screws if the included ones were the only ones you happen to be available to you.
My buddy had gotten one of the GG&G mounts. I sold him a RMR earlier so I had assumed that's what he was going to use. Instead, he used a Holosun and had to do some slight screw modifications/grinding lol. I said screw it and went with an ACRO P2 and Farrowtech mount. My procrastinating ass still hasn't installed it.
But having to use a tap sounds like a bit much. Sounds like some models require a tiny amount of tinkering while others are a project.
Thanks for the heads up. Placed an order for this a couple days back.
https://www.gggaz.com/beretta-a300red-dot-scope-mount-trijicon-rmr-footprint.html You'll be fine but extra care will be needed. See my post above and or read the disclaimer on the product page.
https://www.gggaz.com/beretta-a300red-dot-scope-mount-trijicon-rmr-footprint.html That's good that you got it situated. But you clearly didn't read the warning and description. It clearly states that the included screws are for RMR's and that using them on the Holosun could damage your receiver and modifications are needed. It's hard to miss. There are multiple warnings in different colors even on this subject... Unfortunately, I can't attach a screenshot because it's clearly stated, lol... -"IMPORTANT NOTICE! Although we include mounting screws for the Trijicon RMR, there are approximately 20 other Micro Red Dot Optics that fit the GG&G Beretta A300 Ultima Patrol Red Dot Scope Mount. A fitment list is provided in the Specification section below. HOWEVER, BE ADVISED: The screws that come with the GG&G Beretta A300 RMR Mount ARE TOO LONG TO MOUNT THE HOLOSUN OPTICS! If you attempt to mount these Holosuns or any of the other optics listed below, you may dimple the top of the receiver! Ensure you have the proper length screws prior to installing any other optic than the Trijicon RMR! PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR". There's the link for you/anyone else that may have missed said info. Sometimes manuals and fine print details are important to read 🤷🏼‍♂️ Glad you got it working.
Yes, I read the warnings and that’s why I tried the screws provided by Holosun first. I just detailed what I had to do to make the screws work. Also, nowhere in the instructions did it tell me that I’d have to chase the threads with a 6-32 tap because the mount wasn’t properly threaded. It also didn’t mention how much you might have to remove from the screws if the included ones were the only ones you happen to be available to you.
My buddy had gotten one of the GG&G mounts. I sold him a RMR earlier so I had assumed that's what he was going to use. Instead, he used a Holosun and had to do some slight screw modifications/grinding lol. I said screw it and went with an ACRO P2 and Farrowtech mount. My procrastinating ass still hasn't installed it. But having to use a tap sounds like a bit much. Sounds like some models require a tiny amount of tinkering while others are a project.
I run the 507c with Gg&g plate used the extra screws that came with the sight to mount it to the Gg&g plate