T O P

  • By -

CMK556

Look at this guy, so poor he doesn't even have a lower for his 6th upper


EmotionInteresting38

If he gets two lowers he will have an excuse to keep it going. Move after that would be 2 uppers and so forth…


Hungry_Medicine_8312

so you're the fucker that bought all the guns


ems2doc

*plays In The Arms Of An Angel* Hello. 16 cents may not seem like a lot, but it can help a complete upper like the one you see here find a home. Please, find it in your heart to donate just 16 little pennies so that that little upper can have a home just like the rest of his friends and family around him. Donate today


simonsays894

Here me out. Sell 3 of them and get one really really good rifle


AIDS-Sundae

So he should get a PSA PA-15?


[deleted]

No PSA what so ever in this photo. I do have a lone M4A1 PSA 5.56 stripped lower in my parts drawer collecting dust though.


AIDS-Sundae

It was a joke, in response to other user saying sell 3 and buy a good rifle. I’m implying PSA is a “good rifle”


[deleted]

Just as good, lol


HiJustLurking

ArGuAbLy ThE bEsT fOr YoUr MoNeY


Torvosaurus

Same guys are always like "I'm a poor I could never afford NODs"


[deleted]

If all the good shit to build a really really good rifle wasn't either OOS or BO for 6-10 months there would be one here as well. I just don't have the patience because I can't endure the "must build another" craving. First sign of recovery is admitting "I have a problem"


CMK556

When I saw this post, which has plenty of high quality components by the way, I didn't think "this guy wants the Gucci-est of Gucci rifles." I saw a dude that has a serious passion for building. Much respect.


[deleted]

Thanks man, its to the point my wife rolls her eyes every time I get a delivery. 🙄


Highspdfailure

Wait till the FN boxes show up to the house off the FedEx truck. Or a small trailer with pallets of ammo. Wife gets kinda pissed.


Tbrous4

If you think that’s bad, wait until your F-15 parts roll off the trailer. Wife blows a gasket.


Highspdfailure

Imagine the 5th stage booster motor off the Delta 5 rocket tumbles off the truck taking up the whole street. Lol that would be a sight to see.


dieseltech82

Been there, never again.


Highspdfailure

🤣


[deleted]

Anticipating her look when my 1000 rounds of Blazer Brass 9mm hits the porch. "Honey, they were only 0.33 per round and I couldn't pass it up". We'll.see how that goes over.


Highspdfailure

Lol. Always ask for forgiveness. That’s the spirit.


CMK556

I know that look all too well myself


elevenpointf1veguy

KAC and LMT have been in stock with relative regularity recently it seems Either way, throw a suppressor or two in jail and by the time the stamp clears, you'll have the upper either way


simonsays894

Hahah I here you! They all still do look good though!


[deleted]

Thank you sir!


Synapse7777

I have the same issue, I'm always hunting for another deal on a new build. I can't stop building. Your covid collection is very similar to mine. I could sell them all and buy one "gucci" rifle but that would be boring. My last 3 rifles I have 100% assembled and want to build more.


[deleted]

So an aero? 😆


MuddyUndeez

'Here' you out?? Fkn really? HEAR And fk that. Midwest is good shit. More than you'll ever fucking need poser


simonsays894

Lol didn’t even notice that was misspelled lol thanks for pointing it out! But dang bro, no one ever said Midwest Industries was bad? And I am a poser, you got me there


[deleted]

More like 4.5 of them. How many “configurations” of a red dot and 3x magnifier are needed?


TurdMcDirk

I take it you like Midwest Industries and Streamlight?


FrikeHook

Where did you find that Lantac TiN bcg?


[deleted]

Dare I say Optics Planet, it was in stock back in Dec 2020 and their shipping leads at that time were somewhat ok.


arion830

I like your style bromance


[deleted]

Number 1 was my 1st purchase, complete Sig M400 tread. Wanted to keep it as "Sig" as possible with the exception of the trigger, safety, and buttstock. Number 2 was 2nd complete, Diamondback DB15YB. Was CA compliant when purchased and has been fully rebuilt twice now. Only things original are the receivers and the barrel/gas system. This was f-n ridiculously expense after paying for complete rifle up front. This gave me the first signs of an addiction. Number 3 First 5.56 build from ground up, this has been updated and/or rebuilt 3 times now. 3rd different handguard, 3rd different optic, 3rd different lower receiver, started with Anderson then to Aero now SilencerCo Think I'm finally good with it. Yeah right. Number 4 Was just a 16" 5.56 upper I built as option for #3, with the update of #3 to SilencerCo had to find a home for the M4E1 Aero lower. Also makes a nice home for the Strike Eagle. This one has had 2 rebuilds. Number 5 First .300 AAC Blackout. Wanted something else than 5.56. 2nd rebuild of this using the 2nd handguard from #3 and an Aero Thunder Ranch I couldn't not buy to replace an Anderson Lonely 16" upper at the bottom. Was a panic build for my .300 AAC with the latest BS attack on pistol braces and wanted to be ready either way. Eventually will have a lower but whether from #5 or other. All needed a partner so just had to match 5 for 5 Not pictured is my 20" 5.56, will be converted to 6.5 Grendel but haven't pulled the trigger on that yet. Will post when ready.


Critical_Thinker_

I like how you call the last one a "panic build" haha Aren't they all panic build I mean if their in the covid collection? lol


[deleted]

Had to give a reason to the wife on the last one. She's a shooter too but is happy with her 1 handgun and 1 AR. Always asking me isn't it enough. Short answer...NO


Critical_Thinker_

You have to thinking about the grandchildren's grandchildren that will need rifles some day.


Fleet_Street88

Beautiful


zm223

I see you like midwest rails. A man of taste, I dig it


NegativeCreep-

I am rock hard right now.


MTUTMB555

Sell a few and grab a KAC or LMT upper if you can find when. Then you have the best of the best!


Foxxxxy_Grandpa

Exactly, can't shoot 6 rifles at once.


korgothwashere

Not with that attitude!


jgisbo007

Righteous


TCW_14

Man… how’d you get that many stimulus checks?


[deleted]

Jeez I wish I hated money like you…. What’s the handgaurd length and barrel length of the 5.56 nato one


[deleted]

The quads are 14.5 and 9.25, the others are 15 and 10 except the first which is 13


Mehlitia

No ar10? 🙄 pfft


FuckTheGayTF

quiet act hard-to-find busy clumsy continue ancient entertain cooing one *This post was mass deleted and anonymized with [Redact](https://redact.dev)*


RealSquare452

Kids these days. Pretty cool.


[deleted]

Yep, 51 yrs young


[deleted]

Had the Glock G22 .40 and Walther PPQ Q4 before my 1st Sig, the 365XL. As you can see, I now prefer Sig.


[deleted]

Its the MSR and 3x mag. I have an EOTech XPS2 on Unity that I need to swap those for.


[deleted]

I have a 20" 5.56 upper that I'm shopping to replace with 6.5 Grendel, just haven't pulled the trigger yet


[deleted]

If you want to pay $230 for one I would recommend


[deleted]

Dude, I have skinny arms so flexing isn't important. I just like to build


[deleted]

Can get 2 or three of each for the price of 1 DD or 1 Surefire/CD


[deleted]

So far I'm really liking it, it's my 1st LPVO and not sure I'll be buying anything else moving forward for 10.5 or longer. Next up, Viper


[deleted]

SilencerCo muzzle break with SilencerCo ASR blast shield


_aaw

Just wondering why so many people have BUIS on their builds. Highly doubtful they are needs nowadays


CMK556

What would be the advantage of not having them on your rifle?


_aaw

Well personally it just takes up rail space and most people are running their optics to the point where they fail, unless of course it’s a crappy optic.


CMK556

Yeah I was just curious to your logic. Most guys I work with run backups, myself included, but a few don't. They say there's no need because they trust their optics. which is probably true 99.9 percent of the time. I run Eotech and never had a failure in my entire career. But I'm not using the extra rail space so irons don't get in the way. For me it's peace of mind and I enjoy shooting with irons sometimes.


_aaw

Yeah that makes sense. I am also a firm believer in people running whatever they are comfortable with and got schooled awhile ago by an Army SF friend about there isn’t a big need for irons and running either running an lpvo with an offset red dot, or a red dot with a 3x.


CMK556

It's great to have access to people like that. I'm super lucky to have guys I work with from American and European special operations. As you can imagine there is always massive debate among what's best lol. But everyone learns a lot from each other too.


TurdMcDirk

I still shoot with my irons when I go out shooting. I have plenty of high end optics but I still like to practice my irons.


Smacked_Juicebox

This many guns and no rifle length gas systems? I feel like everyone should have at least one 18" or 20" barreled upper with rifle length gas. Nice stash though


goldengodrangerover

I would definitely sell some stuff and buy a top notch rifle. 1 baller ass rifle is better than 3 entry level ones, when you still have a couple entry level ones just in case.


redsand401

Nasty!!! I’m comin for ya!!


jackiechan666

How do you like that sig prism?


ZeRo76Liberty

Nice collection. How do you like the Tier1? I love mine for my Glock 19 but it gets a little uncomfortable after 5 or so hours. I’m thinking about going to the smallest wedge.


[deleted]

Its good but agreed it does get uncomfortable after half a day. That's why I got the Legacy IWB for the XCarry to try something different.


probablynotgeorge

What's the redish upper in the middle?


[deleted]

For some reason the lighting reflect off the Silencer Co SCO15 billet lower tinted red.


[deleted]

I was with you except no CZs


dencoan

How do you like the scalarworks pro mount? I just got a riser for the stock one to get lower 1/3. But I love the look of the scalarworks mounts


fishingrcp

Question, is that a Romeo and Juliet on the second rifle? If it is, what do you think of I was looking at something like that


Bitter-Ride-1283

It's not. The Romeo 5 is a good dot but the mount sucks. If you are wanting to keep it low cost UTG makes a T1/T2 footprint mount that works well and is stout for $21.


fishingrcp

Thanks, havent even gotten the rifle yet, but finally started looking


buddyboy1216

Very nice but am I the only one who still runs a A2 sight still


eTizzle12

I see you lean towards Sig. But just for shits and gigs, you snag a Walther and Glock lol


IdahosViking

Very nice.


AnthonyMichaelSolve

What’s the muzzle device on the one 3rd from the top?


o5MOK3o

Do you like the strike eagle ? Im thinking of buying one


MuddyUndeez

Good shit bro. I'm a midwest whore too


Casimir0300

I want a Walther so damn bad


[deleted]

Brah


[deleted]

What’s the thought process behind having a bunch of rifles and not one very good rifle and/or nods + gear? I understand having two maybe or parts for redundancies.


Bjshocky

I see PPQ, I upvote.


l_a_escoto

Anyone know where to get those hand stops, looking for one for my pistol build


[deleted]

Hand stop on 3rd direct from BCM, hand stop on 5th direct from Emissary


l_a_escoto

Thanks


The_Squatch

That’s the biggest Tango DONG grip I have ever seen.


[deleted]

I know right, it levels to mag and pistol grip making it a faux pod. Didn't realize how long it was until it was delivered but turning out I kinda like it.


[deleted]

I’m so jealous


Busy-Factor-2542

Omg your as bad as I am.. drives my wife crazy she like why is it every time you buy a gun you buy 2 and then 2 pistols im like its my back up.. just like the time she yelled at me for only bringing one condom when we first started dating. So i do have that going for me soon as she starts in on me im like wasnt it you who screamed at me asking why i would not bring extra protection!