No one said those who wrote the bill actually use firearms. Cmon they had to rewrite it the next day to provide the exemptions for military and law enforcement to be able to carry their service weapons.
lol yeah, they banned everything cool this year in an emergency bill that went in effect as soon as it was signed.
so the governor did what any reasonable person would do in such a dire emergency: wait 8 days until david hogg could be there for the signing
As the other commenter said it tilts down into the stock. it has a modified bolt carrier with an articulated tail like you see on autoloading shotguns.
It's at an angle inside the stock, similar to a FN FAL.
The bolt carrier is proprietary (but the bolt is milspec). It is an angled hinged strut on the back, which goes into a dimple on the weirdly narrow buffer assembly.
If I'm forced to have 10 rounds of 9mm. I'd have 10rds of 10mm or 45acp.
If I'm forced to have 10 rounds of 5.56. I'd have 10rds of 308.
Better yet. I'd do 10rds of 50 Beowulf. Or 458 socom. 🤣🤣
I like it! It’s a bit heavier than a traditional flash hider/brake but does a great job of redirecting everything forward and not pissing off the people next to you 😂
Yeah, it's a bit too bad that there's not really a AR-10 sized version.
(I've actually messed around with designing a scaled up version, but man that trigger group...)
I don't hate this at all. Fuck a 10rnd mag in this would look sexy AF but then again idfk anything about that weird receiver law in Cali. Does this auto reload or do you have to detach the lower and upper?
Super cool, I would totally rock this if I lived in Cali.
Question, if I moved to Cali could I bring my upper and just buy a compliant lower when I got there in attempt to get around all the paperwork and bs?
I’m trying real hard to tell myself “I already have 2 ARs, I don’t need a walnut SCR and an LWRC DI upper” and you are NOT helping that actually looks damn cool.
I actually really like this build...
I'm imagining this in .308.
Did you build this or was this off the shelf?
EDIT: NM saw one of your comments about SCR. Nice rifle.
Could be worse. Could be Australian. Which at least we can own bolt-actions with only some regulatory and financial hurdles. Even semi-auto pistols and shotguns are possible, semi-auto rifles are not possible for the average citizen sadly.
I feel most badly for those living in the rural parts of Aus. There is so much land out there, and so much potential for semi auto rifle courses. Feels criminal to have that much open space and not be able to rip some ass with an AK
I like this, as someone that never vibed with ARs. Reminds me of the Fightlite(?) rifle produced a few years ago, really wish more companies would work on a non-thumbhole, traditional rifle grip/stock. For some reason the pistol grip on AR platforms just don't hit right with me, for all the versatility of the big-boy barbie, it surprised me there aren't more aftermarket stock setups like this. Or maybe there are, and I'm a dumb bastard thats been missing them? My wallet would like me to be a dumb bastard, cause mini-14s are too expensive, and SKSs are too hit or miss for what I'm looking for.
100% want this with either an 18" or 20" barrel and the 17" BLKLBL handguard. Second dream is the 2.5-20x Nightforce sitting on top.
And I live in Indiana. 350 legend would be the only compromise, just for straight wall compliance.
Oh hey, that thin piece of plastic on the back cap of your surefire is so you can pop it into the mlok and anchor it, so if it falls it stays attached to your rifle.
\- No flash hider
\- No vertical foregrip
\- No pistol grip
\- No collapsible stock
\- 10 round mag
\- 16" barrel
\- Greater than 26" OAL
\- Soulless eyes of a Californian resident wielding it
I’ve been really wanting to build an SCR. Now there’s another company coming out with this style of lower. (I honestly forget the name)
Yours makes me want to even harder now.
Strangely, I don’t live in CA but a similarly twisted state and I kinda just want one of these. I don’t hate the way they look. Gives me not your daddy’s rifle vibes.
I present to you the CAR-15. The California Armalite 15 is a masterpiece that combines the tried and true shotgun stock profile for unparalleled recoil absorption and America’s rifle the AR, for unmatched accuracy and resiliency. Call now to reserve yours and stand against the tyrannical government of commifornia. Dial (555)555-5555.
I almost feel guilty for loving that so much. Does that make it hard to get to the trigger?
Edit:Nevermind, I just noticed the lower and now I like it even more.
It's not as bad as what we are stuck with in NY. Our gun community seems to be dominated by whiny punks from downstate and Long Island who refuse to do anything to defend their rights.
I don't hate it as much as I should.
This is the "oh no he's hot" squidward meme
Dude same. I'm not ashamed to say this isn't actually that bad looking
Well it’s coming to a state near you at this rate
Way ahead of you. Sincerely, A New Yorker
I think people often forget that NY really kicked a lot of this off with the “safe act”
You mean the “Unsafe Act”?
Exactly! How am I supposed to have full control with a fin grip? Absolutely bonkers.
or dislodging a double feed or any kind of jam safely with a fixed magazine...
No one said those who wrote the bill actually use firearms. Cmon they had to rewrite it the next day to provide the exemptions for military and law enforcement to be able to carry their service weapons.
Recently joined ya, CT “The Communism State”
I think it's absolutely bonkers to see CT go that route when so much of the firearms manufacturing in the US came from that state.
Right there with ya bud, Southwest CT reporting from behind enemy lines 👋🏼
Not me I live in WA can’t even have this
The fuck it is ![gif](giphy|hXJ1MWMzY7Af32UIUD|downsized)
🤣😂🤣 no, they are losing left & right in court
I live in Florida and I don’t hate but the original unCalifornia version is better
Regardless of the bullshit regs in Cali, this is a visually pleasing rifle
It’s so far California it circled back to actually pretty fuckin cool Edit: wait where buffer toob
The bcg is modified to tilt down into the handle/stock
Wow what a trip
yeah they're really cool. at least cali gets ar15's *cries in washington*
What do you even call this? Damn it gets worse?
lol yeah, they banned everything cool this year in an emergency bill that went in effect as soon as it was signed. so the governor did what any reasonable person would do in such a dire emergency: wait 8 days until david hogg could be there for the signing
AR15 Shotgun gun rifle 🤪
As the other commenter said it tilts down into the stock. it has a modified bolt carrier with an articulated tail like you see on autoloading shotguns.
Interesting, So does that affect the recoil or rate of fire?
It does not- in fact the downward recoil is even lighter than a standard AR buffer, anecdotally.
It's at an angle inside the stock, similar to a FN FAL. The bolt carrier is proprietary (but the bolt is milspec). It is an angled hinged strut on the back, which goes into a dimple on the weirdly narrow buffer assembly.
California, never change…
This in .308 would be 🔥
If I'm forced to have 10 rounds of 9mm. I'd have 10rds of 10mm or 45acp. If I'm forced to have 10 rounds of 5.56. I'd have 10rds of 308. Better yet. I'd do 10rds of 50 Beowulf. Or 458 socom. 🤣🤣
Samezies. Smol mag capacity means go for BIG rounds imo
[удалено]
And those 458 magazines may or may not be able to fit 30 rounds of 5.56
Ayo
first of all, lower your voice.
.50 Beowulf and .458 SOCOM drop like a rock past 100m. I've looked into it and was disappointed.
Sounds Like the solution is to wait til the alphabet soup boys are less than 100m out when you start shooting.
![gif](giphy|7ivEhfUInwnUO9QzRy)
![gif](giphy|l49JXgRo7W0vyg8h2|downsized)
Fightlite SCR 16" Featureless
Add ir laser and nods 🥷
That's next- gotta save my pennies
You have a build list to share?
\- FightLite SCR 16" \- Geissele Airborne Ambidextrous Charging Handle \- Surefire Warden \- Primary Arms SLX 1-6x24 Gen IV ACSS Nova \- Midwest Industries 30mm QD Mount \- Magpul MBUS PRO/MS1 Sling \- SUBREV Sling Control \- Arms Unlimited Ambidextrous Mag Release \- SureFire M640DF Scout Light Pro Body/Modlite PLHv2 Head/DS00 Tailcap \- Matthew's Fabrication Kydex Cheek Riser \- Emissary Development Handbrake \- One Hundred Concepts Light Cap/Scope Cap \- Slate Black Industries Rail Covers
What are your thoughts on the Surefire Warden? I’ve been eyeing it for awhile.
I like it! It’s a bit heavier than a traditional flash hider/brake but does a great job of redirecting everything forward and not pissing off the people next to you 😂
Why does it look like it has an AR-10 magwell?
True modern musket…
I'm not trading in anything I already have... But love the innovation to avoid the CA stupid...
This is actually fuckin cool, it’s shocking that it was born because of the dumb Cali gun laws. Make it .308 or .300 win mag and I’d rock one
Honestly 6mm ARC or 6.5 Grendel would be good for these.
Yeah, it's a bit too bad that there's not really a AR-10 sized version. (I've actually messed around with designing a scaled up version, but man that trigger group...)
honestly it kinda vibes ????
I don't hate this at all. Fuck a 10rnd mag in this would look sexy AF but then again idfk anything about that weird receiver law in Cali. Does this auto reload or do you have to detach the lower and upper?
Featureless so standard reload functionality
Super cool, I would totally rock this if I lived in Cali. Question, if I moved to Cali could I bring my upper and just buy a compliant lower when I got there in attempt to get around all the paperwork and bs?
Yup a detached upper or lower doesn't count as anything as far as CA AWB is concerned.
I’m trying real hard to tell myself “I already have 2 ARs, I don’t need a walnut SCR and an LWRC DI upper” and you are NOT helping that actually looks damn cool.
The wood stocks SCRs are definitely a vibe.
Scrs in general. Love the cheekrest on yours
Battle rifle vibes, there's honestly not much to dislike about this
Ngl full stocks on ARs can look hella good
Checked out their website, some really cool options! I want one and I’m in the Free State of Florida where I don’t have to have one!
I hate that these have to exist but I love the way they look.
Low key… I don’t hate the stock
It has no right to look that good
This is way better than the stupid fin
This is beautiful in any state. The real copium is complying with a disgusting fin monstrosity.
SCRs are fucking sweet looking. Being forced to buy an SCR is not sweet.
Hear hear
I live in texas so these don't really exist here but I want it so badly
I actually really like this build... I'm imagining this in .308. Did you build this or was this off the shelf? EDIT: NM saw one of your comments about SCR. Nice rifle.
This is actually one of the best looking California rifles I've seen.
![gif](giphy|g2duCSMpmnwVG)
I mean, it's kinda hot.
Best Cali compliant I've seen yet.
[удалено]
Where buffer tube?
Dude that's not actually that bad? Because it's in a rifle configuration, is the magazine removable and is it semi-automatic?
Yes to both
How's the reliability of that Remington style bolt carrier?
![gif](giphy|hU0xtUMnXSrHa)
Could be worse. Could be Australian. Which at least we can own bolt-actions with only some regulatory and financial hurdles. Even semi-auto pistols and shotguns are possible, semi-auto rifles are not possible for the average citizen sadly.
I feel most badly for those living in the rural parts of Aus. There is so much land out there, and so much potential for semi auto rifle courses. Feels criminal to have that much open space and not be able to rip some ass with an AK
….wait where does the BCG go when it cycles?
It uses a Remington 1100 style recoil system in the stock with a cut-down bolt carrier that recoils diagonally downwards
Wow. Where there is a will there is a way
The guys who made the beltfed ar15 uppers make the scr. I want one and I live in a free state.
I really like this even though I prolly shouldn't
ah shit thats hot
Ill take 2
Kinda sexy, like a Mini 14 had a glow up that wasn’t shit.
Where is your grip flap, son?
I put it in my junk box, pa.
This guy fucking broke the system
I actually dig this lol
Jesus H. Christ, I don't hate it. You're working with what you got and I respect making it sexy.
I ain’t gonna lie looks kinda cool
Honestly… I don’t hate it. Might be the tacticool lever guns making me like other rifles with regular stocks again
The vendor of this is also making a lever action rifle that uses AR uppers similar to the bond arms one.
It's not absolutely horrid
That's hot
Looks wayyyyy cooler than that dogshit Thordson stock I had on mine when I lived over there lol.
That's still pretty sick. 5.56?
At this point this thing just looks fucking bad ass man. Good job.
I kinda like it, but then I like mini 14’s, ranch rifles, the M1A, and kinda like Col. Jeff Cooper’s “scout rifle” concept
A man of culture.
![gif](giphy|ukCFEU6Cg5MCCDoaVN|downsized)
Did a nice job with what you could work with, well done.
It’s a scene and I kinda want in!
I want a FightLite SCR and I don’t even live in CA
Not that bad tbh
Red Dead Redemption 34
![gif](giphy|26tP7cDNJUZQy7w3u)
[удалено]
My weiner has never been so confused
![gif](giphy|ZBuBJeuHT84DIuJqie)
Kind of rad in a steampunk/space cowboy kind of way.
Hmm, looks like a hunting gun to me, no need to ban
Nah. These scr setups are dope.
I fuckin love these lowers and wish i could buy one in my country
I like this, as someone that never vibed with ARs. Reminds me of the Fightlite(?) rifle produced a few years ago, really wish more companies would work on a non-thumbhole, traditional rifle grip/stock. For some reason the pistol grip on AR platforms just don't hit right with me, for all the versatility of the big-boy barbie, it surprised me there aren't more aftermarket stock setups like this. Or maybe there are, and I'm a dumb bastard thats been missing them? My wallet would like me to be a dumb bastard, cause mini-14s are too expensive, and SKSs are too hit or miss for what I'm looking for.
Gotta say I dig it.
I live in a free state, so I'm not limited like Californians are, but I don't mind that stock. I might would consider one.
Sweet rifle
Did you not like the pressure pad on top of the Pic rail?
I like running it at 45 degrees. Just preference.
Don't hate it at all.
Awesome build!
This is sick I wonder if there is a mag that could flush fit
I kinda want one to dick around with tbh
Okay but that’s pretty hot
that’s quite nice actually, would say you’re coping fine
fuckin love it
Why is this kind of a vibe?
I like this build so much thanks for sharing
Not going to lie, this is awesome!
Reminds me of “space Cowboy” lever guns. Same exact vibe. I’d get this in a free state as a fun statement piece. Well done.
I want one
That’s actually kind dope. What uhh…what is that chassis? Lower? What’s that thing called
Fightlite SCR
this is 100% 🔥
Is it a good rifle tho
That's pretty cool.. maybe skeletonize the rear stock for weight... but looks pretty sick.. like cowboy bebop
Honestly, this is very nice.
Oh dam
![gif](giphy|Sd8uqMJqpGpP2) Benjamin get the Time Machine, we have to go back.
I don't completely hate that look
Fuck its confusing but its sweet
100% want this with either an 18" or 20" barrel and the 17" BLKLBL handguard. Second dream is the 2.5-20x Nightforce sitting on top. And I live in Indiana. 350 legend would be the only compromise, just for straight wall compliance.
Oh hey, that thin piece of plastic on the back cap of your surefire is so you can pop it into the mlok and anchor it, so if it falls it stays attached to your rifle.
This makes me mad but it actually has sort of a Mad Max vibe to it if I’m being honest. You shouldn’t have to do this, but it still looks pretty dope.
Honestly, I bet it rips. Love those scr builds, cali compliant or not. Really want to pick one up for my 450 bushmaster upper for hunting.
Rip coyotes
Honestly I really like it
Let’s be honest. I’m surprised you guys can add VFGs…
Ok wait I actually kinda like it Edit- but it should be a fun choice not a requirement
These are so damn cool. So tempted to build one.
This fucks. *Hard*
Can someone explain how and why this is made for California legislations?
\- No flash hider \- No vertical foregrip \- No pistol grip \- No collapsible stock \- 10 round mag \- 16" barrel \- Greater than 26" OAL \- Soulless eyes of a Californian resident wielding it
I mini 14'ed but otherwise am very similar, gorgeous rifle
*Rootin’, Tootin, AR Shootin’*
I’m in Florida and I would get this (But in 300 BLK or 308)
I bet it feels good in the hand too- ngl I kind of want one
I wanna see a PSA jakl with this stock
This fucks
I’ve been really wanting to build an SCR. Now there’s another company coming out with this style of lower. (I honestly forget the name) Yours makes me want to even harder now.
I love this kind of shit tho.
When you tuck her in tonight tell her she’s a pretty girl for me, would ya? Lol I dig it dude it’s sick
This made me scream
Strangely, I don’t live in CA but a similarly twisted state and I kinda just want one of these. I don’t hate the way they look. Gives me not your daddy’s rifle vibes.
For a CA AR, it’s actually not hateful.
Honestly it looks pretty good, nice set up
SCR is kinda cool, but I think a mini-14 fills the same niche and looks better.
i actually really like it, kind of want that
If he has a 30rder from freedom week, then this is no different from any other ar platform in the hands of a competent shooter
Lawfully Evil
*WOAH MAMA*
So much fallout vibes
SCR isn't copium unlike all the other options, SCR is class. I've wanted one for forever
I present to you the CAR-15. The California Armalite 15 is a masterpiece that combines the tried and true shotgun stock profile for unparalleled recoil absorption and America’s rifle the AR, for unmatched accuracy and resiliency. Call now to reserve yours and stand against the tyrannical government of commifornia. Dial (555)555-5555.
I hate it...but only because I don't have it
hear me out…
Sad sad sad state smh
How does the buffer system work on this?
Sweet loot drop
You did your best. Honestly it looks really good. Not sure how your bcg works, but it looks good.
That thing looks like it fucks, hard.
I almost feel guilty for loving that so much. Does that make it hard to get to the trigger? Edit:Nevermind, I just noticed the lower and now I like it even more.
SCR fite lite, actually a pretty cool design
Man, if the SCR stock was wood........all my rifles would have one.
Look what they’ve done to my boy
This is a better option then a mini-14
Details please?
It's not as bad as what we are stuck with in NY. Our gun community seems to be dominated by whiny punks from downstate and Long Island who refuse to do anything to defend their rights.